The SH-101 Software Synthesizer is a complete reproduction of the iconic SH-101 synthesizer.
Maximum Polyphony | 1 voice |
VCO | Range (64', 32', 16', 8', 4', 2') Pulse Width Modulation (50%--min) PWM Mode switch (MANUAL, LFO, VCF ENV, VCA ENV) Modulation Depth (-min--+max) Tune (+/-50 cent) |
Source Mixer | Square/Pulse wave Level Saw wave Level SUB Oscillator Level SUB Oscillator Waveform switch (1Oct Down Square, 2Oct Down Square, 2Oct Down Pulse) Noise Level |
VCF | Cutoff Frequency (10 Hz--20 kHz) Resonance (0--Self oscillation) ENV Depth (-100%--+100%) Modulation Depth Key Follow (-100%--+100%) |
VCF ENV | Attack Time (1.5 ms--4 s) Decay Time (2 ms--10 s) Sustain Level (0--100%) Release Time (2 ms--10 s) |
VCA | VCA Mode (ENV, GATE) Tone |
VCA ENV | Attack Time (1.5 ms--4 s) Decay Time (2 ms--10 s) Sustain Level (0--100%) Release Time (2 ms--10 s) Gate-Trigger switch (GATE, LFO, GATE+TRIG) |
Effect | Crusher Depth Reverb Level Delay Level Delay Time |
Modulator | LFO/CLK Rate (0.1 Hz--30 Hz) Waveform (SIN, TRI, SAW, SQR, RANDOM, NOISE) |
Controller | Volume Portamento Time (0--5 s) Portamento Mode (ON, AUTO, OFF) Bend Range (VCO) Tempo Sync switch |
Arpeggio | Arpeggio Switch Arpeggio Type (1Oct Up, 1Oct U+D, 1Oct Down, 2Oct Down, 2Oct U+D, 2Oct Down) Arpeggio Step (1/4, 1/8, 1/16, 1/4T, 1/8T, 1/16T) |
Sampling Frequency | 44.1 kHz, 88.2 kHz, 176.4 kHz, 48 kHz, 96 kHz, 192 kHz |
Tones | 64 patches/1 bank *User can make new user banks. |
Plug-In Formats | VSTi 3.6 (32bit/64bit), AU |
Plug-Out Hardware | SYSTEM-1 |
Operating System | macOS™ 10.8.5 or later |
Host Application | VST instruments (VSTi) version: VST 3.6 compatible Audio Units (AU) version: V2 Audio Units compatible |
CPU | Intel® Core™ 2 Duo or better |
RAM | 4 GB or more |
Hard Disk | 100 MB or more |
Display resolution and Colors | 1280 x 800 dots or higher, 16.7 million colors or more |
Other | You'll need Internet connectivity to activate this software. You'll need installation SYSTEM-1 driver to plug-out this software to the SYSTEM-1. |
Operating System | Microsoft® Windows® 7 SP1 Microsoft® Windows® 8/8.1 Microsoft® Windows® 10 * incompatible with Windows® RT, Windows® Phone or virtual machines such as Hyper-V, Virtual PC. |
Host Application | VST instruments (VSTi) version: VST 2.4/3.6 compatible |
CPU | Intel® Core™ 2 Duo or better |
RAM | 2 GB or more |
Hard Disk | 100 MB or more |
Display resolution and Colors | 1280 x 800 dots or higher, 24 bits Full Color or more |
Other | You'll need Internet connectivity to activate this software. You'll need Adobe Reader (available free of charge) in order to read the online help. You'll need installation SYSTEM-1 driver to plug-out this software to the SYSTEM-1. |
*Although Roland has tested numerous configurations and has determined that on average, a computer system similar to that described above will permit normal operation of the PLUG-OUT SOFTWARE SYNTHESIZER, Roland cannot guarantee that a given computer can be used satisfactorily with the PLUG-OUT SOFTWARE SYNTHESIZER based solely on the fact that it meets the above requirements. This is because there are too many other variables that may influence the processing environment, including differences in motherboard design and the particular combination of other devices involved.
Microsoft Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
VST is a trademark and software of Steinberg Media Technologies GmbH.